When you come to us for a balustrade, handrail, benchtop or pool fence, one of the first things we ask is where it will be installed. The answer decides which grade of stainless steel we recommend.

The two grades used most often in Australia are 304 and 316. On installation day they look almost identical. A few years later, in the wrong location, the difference is easy to see.

Here is how the two grades compare, and how to choose the right one for your project.

What is the difference between 304 and 316 stainless steel?

Both grades are made mostly of iron, chromium and nickel. The chromium forms a thin protective layer on the surface, which is what makes stainless steel resist rust.

  • Grade 304 contains around 18% chromium and 8% nickel. It is the most widely used stainless steel in the world and performs well indoors and in mild outdoor conditions.
  • Grade 316 contains similar levels of chromium and nickel, plus 2 to 3% molybdenum.

Molybdenum improves resistance to chlorides, the salts found in sea air, pool water and some cleaning products. This is why 316 is often called marine grade stainless steel.

316 costs more than 304. For the right project, the extra cost pays for itself many times over.

Why distance from the coast matters

The Australian Stainless Steel Development Association (ASSDA) advises that coastal staining occurs most often within 5 kilometres of the surf. Depending on wind direction and local conditions, it can reach 20 kilometres or more inland.

For Newcastle, that takes in a large part of the city. Merewether, Bar Beach, The Hill, Newcastle East, Stockton, Redhead, Caves Beach and Swansea all sit well inside that 5 kilometre band. Homes around Lake Macquarie and Port Stephens also see salt exposure.

ASSDA recommends grade 316 as a minimum within 5 kilometres of the coast. Grade 304 is not recommended for marine environments and is likely to stain.

What is tea staining?

Tea staining is the brown discolouration you sometimes see on stainless steel near the beach. It is caused by salt and moisture sitting on the surface.

The good news is that tea staining is cosmetic. ASSDA notes that it does not affect the structural integrity or lifespan of the steel.

The less welcome news is that it is what everyone notices. A stained balustrade on the front of your home or a discoloured handrail at a venue entrance takes away from the clean finish you paid for.

Choosing the right grade and finish from the start is the most effective way to prevent it.

When 304 is the right choice

Grade 304 is a reliable, cost effective option for:

  • Indoor kitchens, benchtops and splashbacks
  • Commercial kitchens and food preparation areas
  • Internal handrails and staircases
  • Covered areas well away from the coast and pools
  • Many inland Hunter Valley projects, depending on the site

When 316 is the better investment

We recommend grade 316 for:

  • Balustrades, handrails and fencing within 5 kilometres of the coast
  • Pool fencing, spigots and grates around chlorinated and saltwater pools
  • Outdoor BBQ areas and benches near the pool or beach
  • Exposed balconies on coastal apartment buildings
  • Commercial projects where appearance must hold up with minimal upkeep

The finish matters as much as the grade

Grade is only half the story. The surface finish also has a big effect on how stainless steel performs outdoors.

Rougher surfaces hold onto salt and moisture. ASSDA recommends a surface roughness of no more than 0.5 micrometres (Ra) for coastal work, and notes that polished and mirror finishes offer the best performance.

Good design helps too. We design our products to drain well and avoid flat surfaces where water can pool. Rain naturally washes exposed surfaces, so areas under eaves and awnings need more attention.

How to care for stainless steel on the coast

Even 316 needs occasional washing to stay looking its best. ASSDA suggests cleaning:

  • Once a year in sheltered locations
  • Every three months in exposed coastal areas

Warm soapy water and a soft cloth are usually all you need. Our lifespan and maintenance guide covers this in more detail.

A quick guide

  • Inside the home or a commercial kitchen: 304
  • Outdoors, inland and away from pools: 304 is usually fine
  • Near a pool: 316
  • Within 5 kilometres of the coast: 316 with a smooth or polished finish
  • Right on the beachfront or in a splash zone: talk to us about higher grades

Not sure which grade you need?

With two decades of experience fabricating and installing stainless steel across Newcastle, Lake Macquarie and the Hunter Valley, we know how local conditions affect every material we work with. We will recommend the right grade and finish for your site so your investment looks as good in ten years as it does on day one.

Contact us today to discuss your project or request a free quote.